DescriptionNEO Waterproof Bushing Grease is a versatile, pure synthetic, completely waterproof grease containing PTFE. It is formulated to seal out water and lubricate under the most adverse conditions.NEO Waterproof Bushing Grease with its highly adhesive qualities and high load-carrying characteristics forms a tough durable film of lubrication that prevents metal-to-metal contact even under severe shock loads.Our Bushing Grease is also U.S.D.A. H-1, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur.Usage – NEO Waterproof Grease with its waterproof and chemical resistant capabilities is an excellent lubricant on all sliding surfaces, gears and slow to moderate speed bearings (about 1000 RPM maximum) operating in Wet or Dry conditions from -22 degree F to 350 degree F.Due to its pure synthetic base, coupled with the addition of sub-micron size PTFE, NEO Waterproof Grease is an excellent choice for applications in many industries, which requires a clean, tenacious, anti-wear grease.Because of its U.S.D.A. H-1 NEO Bushing Grease is outstanding for use in food processing plants, where equipment wash down is an everyday requirement and water industries, where contamination with conventional petroleum lubricants is a primary environmental concern.NEO Waterproof Grease is compatible with most rubbers and plastics and is a superior lubricant for O rings.Some of its diversified uses include:Open GearsFood EquipmentSlides and WaysSterilizer ChainsGasket and O RingsConveyorsValvesBushingsTrunnionsPool EquipmentAdvantages:U.S.D.A. H-1WaterproofNon MeltingContains PTFEKosher ApprovedHigh Metal AffinityChemically ResistantNon StainingWide Temperature RangeReduces WearPrevents Rust and corrsionHigh Dielectric StrengthN.L.G.I. Grade 2Worked Penetration D-21760 Strokes 28010,000 Strokes 290Base Oil Viscosity D-445cSt at 100 degreeC 200cSt at 40 degreeC 7800Pour Point, degreeF D-97 20Flash Point, degreeF D-92 350Dropping Point, degreeF D-566 NONEEvaporation Loss, percent (10hours at210 degree F) D-972 1.0Corrosion Preventative Test D-1743 PASSWater Washout, percent Loss D-1264 0.01Timken OK Load, lbs. D-2509 404-Ball Wear Scar, mm (40Kg, 75 degreeC, 1hr.at 1200rpm) D2266 0.57Dielectric Strength, KV D-877 30
